It is possible to fill a tank with a submersible pump or a borehole pump. The emptying is possible with a submersible pump that must be chosen according to the liquid. Our submersible pumps are ideal for filling water tanks, but they also serve for the water supply of single-family homes, irrigation of vegetable and gardens. Borehole pumps are suitable for installation in wells (or tanks) even at high depths. For example, our 4" submersible pump (S4) have a flow rates up to 21,6 m3/h with head up to 427 meters with a water temperature between 0°C and +40°C. They can also work in the presence of sand if it does not exceed the value of 150 g/m3. If your needs are not among those listed above, we recommend contacting the local agent to request custom pump. We have a dedicated office to do this task. Our submersible pumps (e.g. the Pulsar, Diver and Divertron series) meet the same needs but offer different characteristics, with flow rates from 0,9 to 7,2 m3/h, head up to 86 meters, and liquids with sand up to 50 g/m3 and a maximum immersion depth of 20 meters. Other submersible pumps, like those of the Feka series (for pumping waste water from septic tanks) Drenag and Nova (for pumping gray water without filamentary bodies) are ideal for emptying water tanks as well as for drainage of water from basements and garages, for installation in rainwater collection and drainage wells or for draining water from tanks or rivers. These pumps have capacities from 1 to 16 m3/h with a maximum head of 10,2 meters, withstand a water temperature between 0°C and +35°C, a particle size between 5 mm and 25 mm and an installation at a maximum depth of 7 meters. If the suspended bodies are up to 50 mm in diameter, we suggest the use of our Feka VS. These pumps are suitable for the drawing of waste water and civil and industrial sewage. The pump body is in stainless steel with double mechanical seal in oil bath, stainless steel is also used for impeller. Flow rates are up to 32 m3/h with a maximum head of 14 meters. The temperature of the liquid must be between 0°C and +35°C, the maximum immersion depth can be 10 meters.

It is possible to fill a tank with a submersible pump or a borehole pump. The emptying is possible with a submersible pump that must be chosen according to the liquid. Our submersible pumps are ideal for filling water tanks, but they also serve for the water supply of single-family homes, irrigation of vegetable and gardens. Borehole pumps are suitable for installation in wells (or tanks) even at high depths. For example, our 4" submersible pump (S4) have a flow rates up to 21,6 m3/h with head up to 427 meters with a water temperature between 0°C and +40°C. Alternatively, you can use a DP surface pump with the ejector installed inside the well for withdrawals of water up to 27 m depth (depending on the model). Our submersible pumps (e.g. the Pulsar, Diver and Divertron series) meet the same needs but offer different characteristics, they have a flow rate from 0,9 to 7,2 m3/h, head up to 86 meters, and liquids with particle of sand up to 50 g/m3 and a maximum immersion depth of 20 meters. We recommend contacting the local agent to ask for assistance for finding the right solution for your needs.

Submersible pumps, like those of the Feka series (for pumping waste water from septic tanks) Drenag and Nova (for pumping gray water without filamentary bodies) are ideal for emptying water tanks as well as for drainage of water from basements and garages, for installation in rainwater collection and drainage wells or for the draining of water from tanks or rivers. The pumps have capacities from 1 to 24 m3 / h with a maximum head of 17 meters, with a water temperature between 0° and +35°C, a particle size between 5 mm and 25 mm and an installation at a maximum depth of 7 meters. If the suspended bodies are solid up to 50 mm in diameter, we suggest the use of our Feka VS pump, that is suitable for the drawing of waste water and civil and industrial sewage. The pump has a stainless-steel body with double mechanical seal in oil filled motor, stainless steel impeller, flow rate from 0 to 32 m3/h with a maximum head of 14 meters. The temperature of the liquid must be between 0°C and +35°C, the maximum immersion depth can be up to 10 metres.

Our electronic control and protection panels are designed for the automatic operation of one or two submersible pumps or borehole pumps, single-phase and three-phase, installed in civil and industrial buildings. It is possible to install a submersible pump inside the Fekafos wastewater collection tanks. The D versions of the panel are equipped with a 3" display that allows constant monitoring of the status of the pumps and sensors. To make installation easier, the panels are equipped with a wizard that guide the user to the first configuration. Our panels are prepared for monitoring via GSM. The E.Box basic and E.Box Plus control panel can control installed pumps for emptying wastewater tanks or drainage water tanks or for piloting pumps for filling tanks. You can learn more about this by following one of our free online courses for installers, plumbers or interested individuals organized by D.Training.

Our E.Swim and Europro High Flow pumps are suitable for the circulation of water in domestic and residential pools, for the treatment of agricultural and industrial waters, clean water or slightly dirty waters with solid or suspended fibers and for the circulation of water in filtration systems in swimming pools. For example the pump is constructed with corrosion-resistant materials, made of fiberglass reinforced techno polymer and cataphoretic coating for the metal components. It has a flow rate of 0,4 to 42 m3/h with a maximum head of 22 meters, and support a maximum ambient temperature of +50°C.

The Feka series (for pumping waste water from septic tanks) Drenag and Nova (for pumping gray water without filamentary bodies) are ideal for emptying water tanks as well as for drainage of water from basements and garages, for installation in rainwater collection and drainage wells or for the draining of water from tanks or rivers. The pumps have rate flow from 1 to 16 m3/h with a maximum head of 10,2 meters, they can withstand a water temperature between 0° and +35°C, a particle size between 5 mm and 25 mm and an installation at a maximum depth of 7 meters. If the suspended bodies are solid up to 50 mm in diameter, we suggest the use of our Feka VS pumps suitable for the drawing of waste water and civil and industrial sewage. The Feka VS pump has a stainless-steel body with double mechanical seal in oil-filled, stainless steel impeller and flow rates from 0 to 32 m3/h with a maximum head of 14 meters. The temperature of the liquid must be between 0° and +35°C, the maximum immersion depth can be 10 meters.

DAB has a product that meets this need, the automatic collection and lifting station with integrated shredder, the Genix, designed to lift waste water from WC, showers, sink or bidets, where the water cannot be expelled by gravity. Thanks to Genix it is possible to install a bathroom wherever you want, even below the level of the sewerage. In the catalog we have two models, one for the connection of a toilet and a sink (Genix 110) and a model with more connection possibilities, toilet, shower, bidet and sink (Genix 130). Our guide explains the main features of the product. You can learn more about this by following one of our free online courses for installers, plumbers or interested individuals organized by D.Training.